Hi, I am using your 1wire board
(http://www.abelectronics.co.uk/products/3/Raspberry-Pi/27/1-Wire-Pi) and
followed the owfs install instructions but I cannot see anything within the
/mnt/1wire directory. I know the board and the temperatures probes are
working as I built another SD card several months back which works. I
followed all the same instructions as before but this time I cannot get it
working with the nearly built SD Card yet if I put my old SD CARD in,
everything is fine. Could something have been updated that is breaking
OWFS? This is what I get -
sudo /opt/owfs/bin/owserver -p 3001 --i2c=/dev/i2c-1:ALL --debug
DEBUG MODE
libow version:
2.9p1
DEBUG: ow_daemon.c:(166) main thread id = 3070091792
CONNECT: ow_avahi_link.c:(68) No Avahi support. Library libavahi-client
couldn't be loaded
CONNECT: ow_dnssd.c:(82) Zeroconf/Bonjour is disabled since dnssd library
isn't found
CALL: ow_parsename.c:(99) path=[]
DEBUG: owlib.c:(81) Globals temp limits 0C 100C (for simulated adapters)
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 18
DEBUG: ow_ds2482.c:(515) ok
CONNECT: ow_ds2482.c:(426) i2c device at /dev/i2c-1 address 18 appears to be
DS2482-x00
DEBUG: ow_ds2482.c:(784) Channel select set error
CONNECT: ow_ds2482.c:(691) DS2482-100 (Single channel)
DEBUG: ow_ds2482.c:(675) Cannot set to port configuration -- not a DS2483
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 19
CONNECT: ow_ds2482.c:(423) i2c device at /dev/i2c-1 address 19 cannot be
reset. Not a DS2482.
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 1A
CONNECT: ow_ds2482.c:(423) i2c device at /dev/i2c-1 address 1A cannot be
reset. Not a DS2482.
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 1B
CONNECT: ow_ds2482.c:(423) i2c device at /dev/i2c-1 address 1B cannot be
reset. Not a DS2482.
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 1C
CONNECT: ow_ds2482.c:(423) i2c device at /dev/i2c-1 address 1C cannot be
reset. Not a DS2482.
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 1D
CONNECT: ow_ds2482.c:(423) i2c device at /dev/i2c-1 address 1D cannot be
reset. Not a DS2482.
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 1E
CONNECT: ow_ds2482.c:(423) i2c device at /dev/i2c-1 address 1E cannot be
reset. Not a DS2482.
CONNECT: ow_ds2482.c:(397) Found an i2c device at /dev/i2c-1 address 1F
CONNECT: ow_ds2482.c:(423) i2c device at /dev/i2c-1 address 1F cannot be
reset. Not a DS2482.
DEBUG: ow_com_close.c:(42) Unimplemented!!!
DEBUG: ow_ds2482.c:(341) Cleaning excess allocated i2c structure
--
View this message in context: http://owfs-developers.1086194.n5.nabble.com/Nothing-Showing-Under-mnt-1wire-tp10135.html
Sent from the OWFS Developers mailing list archive at Nabble.com.